Monday, October 31, 2011

Chopper guy stuff

Having 2 old Harleys broke down on the side of the road. My Ironhead was a small chunk of o-ring from the new kit I installed in the carb and Matt's Shovel was some wiring to the coil that was rubbing against the cylinder fins. Long story short we fixed it all and rode both bikes home. What only should have taken 15min took 3hrs.

Steffan
Zombie Performance
www.zombieperformance.com

Almost Rabbits

More like Zombie Apes with a lot of pull back

Steffan
Zombie Performance
www.zombieperformance.com

12in Zombie Performance Riserless Rabbits

12in tall, 15in width [end to end], 8in long grips, 1in tube, and 3.5in center.

Steffan
Zombie Performance
www.zombieperformance.com

switch housing slots

Steffan
Zombie Performance
www.zombieperformance.com

Heading out to the Slab City Roit SALE!

Im taking off for the Slab City Riot 3 for a week and id like to have a big pile of handlebar orders to come back too. So,.....place your order anytime between now 10-31-11and 11-9-11 and get 25%off for having to wait for my happy ass to get back. This offer is available to ALL handle bars. Production to Custom. Clamp style or Riserless. Powdercoated or Raw.

discount does NOT apply to shipping.





Ready for the Slab City Riot 3!

Got the bike ready to go! I just need to pack ma'sheet.

I built these Almost Rabbits handlebars because I needed a bar that came back toward me! But,.. like a young teenage girl I wasn't sure if I was ready to "Go All The Way".

I also made up this handy little pushrod holder tool incase I need to adjust my valves on the side of the road.

I can't wait! I'm ready to squeel with excitment!
Steffan
Zombie Performance
www.zombieperformance.com

Milf Monday

Jennifer Garner

Wednesday, October 26, 2011

12in Zombie Performance "Zombie Zeez"

These are off getting coated now. This customer wanted the grips to sit at 10in and are all cleaned up for internal wiring.

Steffan
Zombie Performance
www.zombieperformance.com

Beerbooters!

Thanks Terry for the swag and brew!

Steffan
Zombie Performance
www.zombieperformance.com

Tuesday, October 25, 2011

Tuesday, October 18, 2011

Tanked Up Tuesday

Ninkasi Sleighr Dark Double Alt Ale.

Just like everything else Ninkasi makes,.....DELICIOUS!

Steffan
Zombie Performance
www.zombieperformance.com.

Umpqua Valley Thunder Calender $20

Look who made the month of March!
Pick up of the these at Big River Cycles in Roseburg or hit me up via email if you want one. Just like the event, all the proceeds go to the Wounded Warrior project.
Steffan
Zombie Performance
http://www.zombieperformance.com/

Sunday, October 16, 2011

Zombie Performance "Glory Holes" Bars and "Leg Splitters" Bars

I had some scraps laying around and !BAM! I pooped these out.
"Now I don't know what to name it"
Steffan
Zombie Performance
http://www.zombieperformance.com/

Baby Zombie Rabbits

7in tall and the grips are 10in apart.

Arnt they cute?

Steffan
Zombie Performance
www.zombieperformance.com

Customer 11in Zombie Apes

This customer wanted a flatter handle bar so I only rotated them back 5 degrees.

You get them how you want them!

Steffan
Zombie Performance
www.zombieperformance.com

In the beginning...

These were the very first handle bars I ever built. As you can see they were the jump off to my Clown Car Bars.

They are thinwall stainless I stole from a friend. I'm pretty sure they were some cafeteria table legs or something at one time.
I didn't have a tig welder or a bender. So I cut them up, mig welded them with steel wire and bent them by heating the tube with a torch. Hense the crinkly tubing. I ran thes suckers for a long time and they never cracked. The welds would start to rust but that was it.

Crazy to see how far things have come. I thought about throwing them in the scrap bin a bunch of times but just couldn't get myself to do it.

Steffan
Zombie Performance
www.zombieperformance.com

Quick tank repair

Fast Eddie Broke the lower mount on his Knuckle. So,...badda Bing a badda Boom!

I ran a little bead around the hole to hopefully give it a little more strength.

Steffan
Zombie Performance
www.zombieperformance.com

Thursday, October 13, 2011

Wednesday, October 12, 2011

900 sporty mock up

Just stuffed the motor into this frame and have been throwing parts on it to see what will work and look the best with what I have in the short amount of time I have before Slab. I'm not a fan of this frame but its new and the only one I have outside of the stocker. I have to keep myself from wanting to fab all this cool stuff because I just don't have the time between now and then. We'll see how it goes from here.

I have a new biltwell seat on its way. I just can't deal with te fat chic solo that came with it.

Steffan
Zombie Performance
www.zombieperformance.com